D485 Modbus to DeviceNet Converter

The D485 to DeviceNet Modbus converter acts as a gateway between a Modbus RTU network and a DeviceNet network. Integration of Modbus devices on DeviceNet networks is enabled without loss of functionality, control and reliability, both when replacing existing equipment, as well as when creating new facilities. The D485 Modbus to DeviceNet Converter is an external DIN rail mounted device that provides connectivity DeviceNet network via an RS232 / RS422 / RS485 serial interface. The D485 is configured using cable P485 / D485 and Software / D485 D485 EnerVista Setup configuration.

P485 Modbus to Profibus Converter

The P485 Profibus Modbus converter acts as a gateway between a Modbus RTU network and a Profibus-DP network. Integration of Modbus devices on Profibus networks is enabled without loss of functionality, control and reliability, both when replacing existing equipment, as well as when creating new facilities. The P485 Profibus Modbus Converter is an external DIN rail mounted device that provides network connectivity to Modbus Profibus devices through an RS232 / RS422 / RS485 serial interface. The P485 is configured using cable P485 / D485 and Software / Configuration D485 P485 EnerVista configuration.

FAC1000/2000 Fiber Optic Multiplexer

The FAC 1000/2000 is oriented multi-point communication with multiple devices using fiber optic multiplexer. It provides one or two inputs and multiple outputs.

USB-to-Serial

This cable is the solution for users who want to communicate with GE Power FDI through PCs that have USB communication ports. The use of this cable is quick and easy. Simply install the cable driver on your PC, connect the cable and is ready to communicate.

RS232 / 485 Convertor (SCI module)

The RS232 / 485 is a standalone device for converting RS232 signals to RS485 signals. Its simple design makes it ideal for use with all protection products power management directly and modem communication. The RS232 / 485 converter has been discontinued and replaced by the A / 485 / F485 RS232 fiber.

F485 Convertidor de Comunicaciones

The F485 is a standalone device for conversion between RS232, RS485 and fiber optic signals. The F485 is electrically insulated to improve communications in noisy environments. The converter uses internal switches to select the type conversion rates and communication signal up to 57600 bps. The F485 uses the data on the serial port to determine the direction and therefore requires no hardware communication signals from the computer. The F485 can be powered via the supplied power adapter or by connecting a 9 VAC / VDC external to the power supply terminals located on the back of the box. The versatility of the F485 and simple design makes it ideal for use with all Multilin products directly and modem communication.

MC-E Series Ethernet

The Multilink MC-E series makes it easy to use the power of the optical fiber to extend Ethernet networks to remote locations. The fiber port is available in a variety of connector types and connections can withstand extremely long distances up to 40 km. With integrated 2-port switch copper, it is also the fastest way to add several drops of Ethernet to remote locations. Designed and built for use in harsh industrial and utility environments, MC-E Multilink family provides a robust, reliable connectivity in almost any conditions.

MultiNet Serial-to-Ethernet

MultiNet is a communications module that provides GE Multilin IEDs Modbus serial communications Modbus TCP / IP over Ethernet, which enables connection to systems fiber optic networks LAN and WAN. MultiNet has the ability to connect up to 32 serial Modbus devices eliminating complex wiring and additional converters, communications, and providing a flexible and economical Ethernet hub.

MultiNet4

MultiNet4 provides Modbus serial devices with communications capability Modbus TCP / IP on an Ethernet network, which allows connection to systems LANs and WANs through the media of fiber or yarn. four serial ports MultiNet4 have the ability to connect up to 128 Modbus serial devices, eliminating complex wiring and additional converters communications, while enabling connectivity to the network via an Ethernet switch 4 fully managed ports.

MultiNet1000

The MultiNet1000 is designed specifically for extremely aggressive environments such as power substations, and meets IEEE1613 and IEC 61850-3 specifications for protection / ESD EMI. With the ability to operate at -40 ° C to + 85 ° C without holes open ventilation or fans, and support for options power supply powerful, both one and two, the MultiNet1000 is ready for almost any challenge location.

Please reload

Media Converter